Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Chrysler Intrepid BaseFACTORY OEM SERVICE PROCEDURE
Chime Sounds With Driver Door Open Key Removed
Possible Causes:
- Key-In SW Status
- Key-In Ignition Shorted
- Key-In Ignition SW Sense Short To Ground
- Body Control Module
Testing
- Ensure all exterior lights are off. With the scan tool select: BODY COMPUTER, Input Output. Read the Key-In Ignition SW. Remove the key from the ignition switch. If the scan tool shows Key-In IGN OPEN, replace the BCM. See BODY CONTROL MODULEΒ under REMOVAL & INSTALLATION. If the scan tool does not show Key-In IGN OPEN, go to next step.
- Disconnect the ignition switch connector. If the chime turned off, check the ignition lock cylinder for damage. If OK, replace the ignition switch. See IGNITION SWITCHΒ under REMOVAL & INSTALLATION. If not OK, go to next step.
- Turn ignition off. Disconnect the BCM C2 connector. Using a DVOM, measure the resistance of the key-in ignition switch sense circuit to ground at the ignition switch connector. If the resistance is below 100 ohms, repair the key-in ignition switch sense wire for a short to ground. If the resistance is 100 ohms or more, go to next step.
- If there are no possible causes remaining, replace the BCM. See BODY CONTROL MODULEΒ under REMOVAL & INSTALLATION.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.
