2002 Chrysler Intrepid BaseFACTORY OEM SERVICE PROCEDURE

Programming SKIM

  1. Connect DRBIII® to Data Link Connector (DLC). DLC is located below driver's side of instrument panel. See Figure. Place transmission in Park or Neutral. Turn the ignition on, with the engine off.
  2. With DRBIII®, select THEFT ALARM, SKIM then MISC.
  3. Select SKIM MODULE REPLACEMENT GASOLINE.
  4. Program the 4-digit Personal Identification Number (PIN) into the SKIM.
    5. CAUTION: Enter correct country code in SKIM. If incorrect country code is entered, SKIM must be replaced.
  5. Select COUNTRY CODE and enter the correct country.
  6. Select UPDATE VIN (the SKIM will learn the VIN from the PCM).
  7. Press ENTER to transfer the VIN (the PCM will send the VIN to the SKIM).
  8. The DRBIII® will ask if you want to transfer the secret key data from the PCM. This will ensure the current vehicle ignition keys will still operate the Sentry Key Immobilizer System (SKIS).
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.