Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Setting Memory Positions In Remote Keyless Entry System
Memory Heat Seat/Mirror Module (MHSMM) communicates with the Remote Keyless Entry (RKE) system through the Programmable Communication Interface (PCI) bus (Violet/Yellow wire). See WIRING DIAGRAMS . MHSMM settings can be programmed and recalled by the RKE system. Up to 2 RKE transmitters can be programmed with memory function. To program RKE system for memory recall, perform following procedures:
- Set memory seat, mirrors and radio to desired positions.
- Press and release memory switch No. 1 button. Within 10 seconds, press and release LOCK button on one of the RKE transmitters. Do not press any buttons for 10 seconds.
To set RKE transmitter for memory position No. 2, repeat procedure using memory switch No. 2 button.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.