Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Chrysler Intrepid (CANADA) V6-3.5LFACTORY OEM SERVICE PROCEDURE
Connecting Rod Bearing
Bearing Clearance 0.019 - 0.081 mm (0.0007 - 0.0031 in.)
Piston Pin Bore Diameter 24.0076 - 24.0153 mm (0.9452 - 0.9455 in.)
Side Clearance (Max.) 0.39 mm (0.0153 in.)
Total Weight (Less Bearing) 647 grams (22.8223 oz.)
Connecting Rod Cap Nuts 54 Nm (40 ft. lbs.) + 1/4 turn
Piston Pin Bore Diameter 24.0076 - 24.0153 mm (0.9452 - 0.9455 in.)
Side Clearance (Max.) 0.39 mm (0.0153 in.)
Total Weight (Less Bearing) 647 grams (22.8223 oz.)
Connecting Rod Cap Nuts 54 Nm (40 ft. lbs.) + 1/4 turn
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
