Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Chrysler Intrepid (CANADA) V6-3.5LFACTORY OEM SERVICE PROCEDURE
Camshaft, Engine
Camshaft Bore Diameter 43.038 - 43.059 mm (1.6944 - 1.6952 inch)
Bearing Journal Diameter 42.939 - 42.960 mm (1.6905 - 1.6913 inch)
Diametrical Clearance
Standard 0.078 - 0.12 mm (0.003 - 0.0047 inch)
Max 0.15 mm (0.0059 inch)
End Play 0.11 - 0.35 mm (0.004 - 0.014 inch)
Bearing Journal Diameter 42.939 - 42.960 mm (1.6905 - 1.6913 inch)
Diametrical Clearance
Standard 0.078 - 0.12 mm (0.003 - 0.0047 inch)
Max 0.15 mm (0.0059 inch)
End Play 0.11 - 0.35 mm (0.004 - 0.014 inch)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
