Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Chrysler Intrepid (CANADA) V6-3.5LFACTORY OEM SERVICE PROCEDURE
System Specifications
A/C Condenser to Radiator Bolts 5 Nm (45 in. lbs.)
A/C Belt Tensioner & Pulley Bolts
2.7L 28 Nm (250 in. lbs.)
3.5L 54 Nm (40 ft. lbs.)
Engine Block Heater 12 Nm (105 in. lbs.)
Cooling System Bleed Valve
2.7L 12 Nm (105 in. lbs.)
3.5L 8 Nm (70 in. lbs.)
Condenser Inlet Tube Bracket Screw 5 Nm (45 in. lbs.)
Engine Oil Cooler Lines to Engine 30 Nm (260 in. lbs.)
Engine Oil Cooler Lines to Radiator 18 Nm (160 in. lbs.)
Engine Coolant Sensor 28 Nm (20 ft. lbs.)
Radiator Fan to Radiator Screws 5 Nm (45 in. lbs.)
Generator/Power Steering Belt Tensioner Pulley Nut 54 Nm (40 ft. lbs.)
Thermostat Housing Bolts 12 Nm (105 in. lbs.)
Transmission Oil Cooler Hose Clamps 3 Nm (28 in. lbs.)
Transmission Oil Cooler Flare Nuts at Trans 30 Nm (260 in. lbs.)
Water Pump Bolts 12 Nm (105 in. lbs.)
Water Outlet Connector Bolts (2.7L) 12 Nm (105 in. lbs.)
A/C Belt Tensioner & Pulley Bolts
2.7L 28 Nm (250 in. lbs.)
3.5L 54 Nm (40 ft. lbs.)
Engine Block Heater 12 Nm (105 in. lbs.)
Cooling System Bleed Valve
2.7L 12 Nm (105 in. lbs.)
3.5L 8 Nm (70 in. lbs.)
Condenser Inlet Tube Bracket Screw 5 Nm (45 in. lbs.)
Engine Oil Cooler Lines to Engine 30 Nm (260 in. lbs.)
Engine Oil Cooler Lines to Radiator 18 Nm (160 in. lbs.)
Engine Coolant Sensor 28 Nm (20 ft. lbs.)
Radiator Fan to Radiator Screws 5 Nm (45 in. lbs.)
Generator/Power Steering Belt Tensioner Pulley Nut 54 Nm (40 ft. lbs.)
Thermostat Housing Bolts 12 Nm (105 in. lbs.)
Transmission Oil Cooler Hose Clamps 3 Nm (28 in. lbs.)
Transmission Oil Cooler Flare Nuts at Trans 30 Nm (260 in. lbs.)
Water Pump Bolts 12 Nm (105 in. lbs.)
Water Outlet Connector Bolts (2.7L) 12 Nm (105 in. lbs.)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.