Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Chrysler Intrepid (CANADA) V6-2.7LFACTORY OEM SERVICE PROCEDURE
Connecting Rod Bearing
Connecting Rod Journals
Diameter 53.51 - 53.49 mm (2.1067 - 2.106 inch)
Bearing Clearance 0.024 - 0.064 mm (0.001 - 0.0026 inch)
Out of Round (Max.) 0.015 mm (0.0006 inch)
Taper (Max.) 0.015 mm (0.0006 inch)
Connecting Rod Cap Bolts 27 Nm (20 ft. lbs.) + 1/4 Turn
Diameter 53.51 - 53.49 mm (2.1067 - 2.106 inch)
Bearing Clearance 0.024 - 0.064 mm (0.001 - 0.0026 inch)
Out of Round (Max.) 0.015 mm (0.0006 inch)
Taper (Max.) 0.015 mm (0.0006 inch)
Connecting Rod Cap Bolts 27 Nm (20 ft. lbs.) + 1/4 Turn
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.