Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2001 Chrysler Intrepid (CANADA) V6-2.7LFACTORY OEM SERVICE PROCEDURE
Trouble Code Erasure
TROUBLE CODE ERASURE
A Diagnostic trouble code will be cleared from TCM memory if it has not reset for 40 warm-up cycles.
A warm-up cycle is defined by CARB as a sufficient vehicle operation such that the coolant temperature has risen by at least 40°F from engine starting and reaches a minimum temperature of 160°F.
The Malfunction Indicator Lamp (MIL) will turn off after 3 good trips or when the DTC's are cleared from the TCM.
A Diagnostic trouble code will be cleared from TCM memory if it has not reset for 40 warm-up cycles.
A warm-up cycle is defined by CARB as a sufficient vehicle operation such that the coolant temperature has risen by at least 40°F from engine starting and reaches a minimum temperature of 160°F.
The Malfunction Indicator Lamp (MIL) will turn off after 3 good trips or when the DTC's are cleared from the TCM.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.