Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2001 Chrysler Intrepid (CANADA) V6-2.7LFACTORY OEM SERVICE PROCEDURE
Memory Positioning Switch: Service and Repair
The proper procedure of setting and recalling a memory position using the memory switches is as follows:
1. Adjust the seat, recliner and side view mirrors to the desired position.
2. Press momentarily and release memory switch S.
3. Press momentarily and release memory switch 1 or 2.
4. To program the second driver's position, repeat the above procedure using the remaining memory switch.
5. To recall either of the programmed positions, momentarily press and release either memory selector switch 1 or 2.
1. Adjust the seat, recliner and side view mirrors to the desired position.
2. Press momentarily and release memory switch S.
3. Press momentarily and release memory switch 1 or 2.
4. To program the second driver's position, repeat the above procedure using the remaining memory switch.
5. To recall either of the programmed positions, momentarily press and release either memory selector switch 1 or 2.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.