2000 Chrysler Voyager Base, 2.4 BFACTORY OEM SERVICE PROCEDURE

VTSS Verification Test

Ensure all doors, hood and liftgate are closed. Open driver's door. Remove ignition key. Lock doors with remote keyless entry system transmitter. Close driver's door. If Vehicle Theft Security System (VTSS) indicator light flashes, system is operational. If VTSS indicator light does not flash, either 4 engine starts has not occurred or repair VTSS system by symptom. See SYMPTOM IDENTIFICATIONΒ  table under SELF-DIAGNOSTIC SYSTEM.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.