Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Chrysler Neon (CANADA) L4-2.0LFACTORY OEM SERVICE PROCEDURE
Crankshaft Specifications
| Journal Diameter | Connecting Rod | 1.8894-1.8900 |
| Main Bearing | 2.0469-2.0475 | |
| Journal Out-of-Round | Maximum | 0.0001 |
| Journal Taper | Maximum | 0.0001 |
| Diametrical Clearance | 0.0008-0.0024 | |
| Main Bearing Cap/Bedplate | M8 Bolts | 25 |
| M11 Bolts | 60 | |
| Crankshaft End-Play | 0.0035-0.0094 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.