Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Chrysler Neon (CANADA) L4-2.0LFACTORY OEM SERVICE PROCEDURE
Piston Ring, Engine
| Ring Gap | Top Compression Ring | Standard | 0.009-0.020 |
| Wear Limit | 0.031 | ||
| 2nd Compression Ring | Standard | 0.019-0.031 | |
| Wear Limit | 0.039 | ||
| Oil Control Steel Rail | Standard | 0.009-0.026 | |
| Wear Limit | 0.039 | ||
| Ring Side Clearance | Compression Rings | Standard | 0.0010-0.0026 |
| Wear Limit | 0.004 | ||
| Oil Ring Pack | Standard | 0.0002-0.0070 | |
| Ring Width | Compression Rings | Standard | 0.046-0.047 |
| Oil Ring Pack | Standard | 0.1124-0.1184 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.