2000 Chrysler Intrepid ESFACTORY OEM SERVICE PROCEDURE

To Increase Speed

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, 2003 Chrysler 300M, and 2002 Dodge Intrepid. However, it is still accessible from the selected car via links, so may be relevant.

With S/C system on, increase set speed by rapidly pressing and releasing ACCEL/RESUME button. Each pressing of button will cause speed increase of 2 MPH. For example, pressing button 3 times will increase speed by 6 MPH. To increase speed gradually, hold ACCEL/RESUME button down until desired speed is reached. When button is released, new set speed will be maintained, as long as vehicle speed is not more than 85 MPH.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.