Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Chrysler Intrepid ESFACTORY OEM SERVICE PROCEDURE
Passenger Mirror Inoperative From Memory
NOTE:
Ensure seat frame is connected to ground if seat is unbolted from vehicle.
- Turn ignition off. Disconnect Memory Heated Seat/Mirror Module (MHSMM) harness connector C2. Measure voltage at terminal No. 12 (Dark Blue wire) at MHSMM harness connector C2 while operating power mirror switch to passenger's mirror left position. See Figure . If battery voltage exists when switch is pressed, go to next step. If battery voltage does not exist when switch is pressed, repair open in Dark Blue wire between power mirror switch and MHSMM.
- Measure voltage at terminal No. 11 (White wire) at MHSMM harness connector C2 while operating power mirror switch to passenger's mirror down position. If battery voltage exists when switch is pressed, go to next step. If battery voltage does not exist when switch is pressed, repair open in White wire between power mirror switch and MHSMM.
- Measure voltage at terminal No. 13 (Yellow/Black wire) at MHSMM harness connector C2 while operating power mirror switch to passenger's mirror up position. If battery voltage exists when switch is pressed, replace MHSMM. If battery voltage does not exist when switch is pressed, repair open in Yellow/Black wire between power mirror switch and MHSMM.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.