2000 Chrysler Intrepid BaseFACTORY OEM SERVICE PROCEDURE

Computer Mini-Trip Computer Test

WARNING: This page is about a different car, the 2003 Chrysler Concorde, 2003 Chrysler 300M, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the ignition switch in the OFF position simultaneously press the C/T and STEP buttons and hold.
  2. Turn the ignition switch to ON position, then release C/T and STEP buttons.
  3. The CMTC should light all segments on the Vacuum Florescent Display Screen (VFDS) for 2-4 seconds. Check for segments that are not illuminated.
  4. If the CMTC displays PASS, the module is OK.
  5. If the CMTC displays FAIL, replace the module.
  6. If the CMTC displays BUS, check for an open or a shorted on the PCI bus communication circuit.
  7. Press the C/T or the STEP button to exit the self diagnostic test.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.