Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Chrysler Intrepid BaseFACTORY OEM SERVICE PROCEDURE
Torque Specifications
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| A/C Belt Tensioner Pivot Bolt | ||
| 2.7L Engine | 21 (28) | |
| 3.5L Engine | 40 (54) | |
| Accessory Drive Belt Tensioner Pulley Lock Nut | 40 (54) | |
| Compressor Mounting Bolts | 21 (28) | |
| Compressor Shaft Bolt | 11-15 (15-20) | |
| Discharge Line-To-Condenser | 17 (23) | |
| Expansion Valve Lines | 17 (23) | |
| Expansion Valve-To-Evaporator | 17 (23) | |
| Receiver-Drier Fittings | 10 (14) | |
| Suction Line-To-Compressor Bolt | 17 (23) | |
| INCH Lbs. (N.m) | ||
| A/C Pressure Transducer | 53 (6.0) | |
| Blower Motor Screws | 19 (2.2) | |
| Condenser-To-Radiator Bolt | 45 (5.1) | |
| Door Actuator Screw | 19 (2.2) | |
| HVAC Housing Screws | 19 (2.2) | |
| HVAC Housing-To-Dash Panel Nuts | ||
| Engine Compartment Side | 44 (5.0) | |
| Passenger Compartment Side | 40 (4.5) | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.