Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Memory System
The memory switch is located on front outboard side of driver's seat. To program memory system for first driver, adjust driver's seat, outside mirrors and radio station to desired settings. Press and release memory switch "S" button. Press and release memory switch No. 1 button. To program memory system for second driver, repeat procedure and select memory switch No. 2 button. To recall desired memory position, press and release appropriate memory switch button. Driver's seat, mirrors and radio station will return to stored position.
To recall memory positions using Remote Keyless Entry (RKE) transmitters, press UNLOCK button on transmitter. Seat and mirrors will move to stored position. To set stored positions in RKE, see SETTING MEMORY POSITIONS INTO REMOTE KEYLESS ENTRY SYSTEM under PROGRAMMING. Memory recall using RKE can be performed anytime ignition is on and vehicle transmission is in Park position. Module will abort RKE memory recall if seat is manually moved or vehicle is shifted from Park position while memory recall is in operation.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.