2000 Chrysler Intrepid (CANADA) V6-3.5LFACTORY OEM SERVICE PROCEDURE

Crankshaft, Engine

Diameter 2.519 - 2.520
Main Bearing Diametrical Clearance 0.0007 - 0.0030
-(Maximum Allowable) 0.0034
Out-of-Round (Maximum) 0.0006
Taper (Maximum) 0.0006
End Play 0.004 - 0.012
-(Maximum) 0.017
Connecting Rod Cap Nuts 40 + 1/4 Turn
Crankshaft Main Bearing Cap Inner Main Cap Bolts 15 + 1/4 Turn
Outer Main Cap Bolts 20 + 1/4 Turn
Tie Bolts (Horizontal) 250
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.