Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Chrysler Intrepid (CANADA) V6-3.5LFACTORY OEM SERVICE PROCEDURE
Transmission Position Sensor/Switch: Service and Repair
REMOVAL
1. Disconnect the TRS connector.
2. Remove valve body assembly from vehicle.
3. Remove the manual shaft seal (Fig. 85).
4. Remove manual shaft/TRS retaining screw (Fig. 86).
5. Slide TRS off of manual valve shaft.
INSTALLATION
1. Install the TRS to the manual shaft. Make sure TRS locating pin rests in manual valve bore slot.
2. Install the TRS/manual shaft retaining screw and torque to 5 Nm (45 inch lbs.) torque (Fig. 86).
3. Install the manual shaft seal (Fig. 85).
4. Install valve body to transaxle.
1. Disconnect the TRS connector.
2. Remove valve body assembly from vehicle.
Fig. 85:
3. Remove the manual shaft seal (Fig. 85).
Fig. 86:
4. Remove manual shaft/TRS retaining screw (Fig. 86).
5. Slide TRS off of manual valve shaft.
INSTALLATION
1. Install the TRS to the manual shaft. Make sure TRS locating pin rests in manual valve bore slot.
2. Install the TRS/manual shaft retaining screw and torque to 5 Nm (45 inch lbs.) torque (Fig. 86).
3. Install the manual shaft seal (Fig. 85).
4. Install valve body to transaxle.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.