2000 Chrysler Intrepid (CANADA) V6-3.2LFACTORY OEM SERVICE PROCEDURE

Camshaft, Engine

Bearing Journal Diameter 1.6905-1.6913 Inch (in)
Diametrical Clearance 0.003-0.0047 Inch (in)
Clearance (Max.) 0.0059 Inch (in)
Camshaft Endplay 0.004-0.014 Inch (in)
Valve Timing-Intake Open 1 Degrees After Top Dead Center (deg ATDC)
Close 51 Degrees After Bottom Dead Center (deg ABDC)
Duration 240 Degrees (deg)
Centerline 108 Degrees (deg)
Valve Timing-Exhaust Opens 48 Degrees Before Bottom Dead Center (deg BBDC)
Closes 12 Degrees After Top Dead Center (deg ATDC)
Duration 240 Degrees (deg)
Centerline 108 Degrees (deg)
Valve Overlap 11 Degrees (deg)
Camshaft Sprocket Bolt Right Side 75 Foot Pound-Force (ft.lb)
Left Side 85 Foot Pound-Force (ft.lb)
Camshaft Thrust Plate Bolts 250 Inch Pound-Force (in.lb)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.