Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Chrysler Intrepid (CANADA) V6-2.7LFACTORY OEM SERVICE PROCEDURE
Alignment
| Curb Height Adjustment | CONCORDE/LHS/300M | FRONT | 29.09 +- 0.79 |
| REAR | 29.68 +- 0.79 | ||
| INTREPID | FRONT | 28.70 +- 0.79 | |
| REAR | 28.93 +- 0.79 | ||
| Front Wheel Alignment All specifications are given in degrees. All wheel alignments are to be set with the vehicle at curb height. | Camber | Perferred Range | 0.00 |
| Acceptable Range | -0.60 to +0.60 | ||
| Cross Camber (Maximum Side-To-Side Difference) | Perferred Range | 0.00 | |
| Acceptable Range | 0.70 | ||
| Total Toe | Preferred Settings | 0.00 | |
| Acceptable Range | 0.20 to +0.20 | ||
| Rear Wheel Alignment All specifications are given in degrees. All wheel alignments are to be set with the vehicle at curb height. | Camber | Perferred Range | 0.20 |
| Acceptable Range | -0.70 to +0.30 | ||
| Total Toe TOTAL TOE is the sum of both the left and right wheel toe settings. TOTAL TOE must be equally split between each front wheel to ensure the steering wheel is centered after setting toe. Positive (+) is Toe-in, Negative (-) is Toe-out. | Perferred Range | +0.10 | |
| Acceptable Range | -0.20 to +0.40 | ||
| Thrust angle | Perferred Range | +0.10 | |
| Acceptable Range | -0.15 to +0.15 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.