Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Chrysler Intrepid (CANADA) V6-2.7LFACTORY OEM SERVICE PROCEDURE
Memory/Heated
8W-63-3:
Circuit Breaker No.2 (JB)
G300
Junction Block
Passenger Power Seat Front Riser Motor
Passenger Power Seat Horizontal Motor
Passenger Power Seat Rear Riser Motor
Passenger Power Seat Recliner Motor
Passenger Power Seat Switch
8W-63-4 (Memory/Heated):
Driver Power Seat Front Riser Motor
Driver Power Seat Horizontal Motor
Driver Power Seat Rear Riser Motor
Driver Power Seat Recliner Motor
Driver Power Seat Switch
G300
Memory Heated Seat/Mirror Module
8W-63-5 (Memory/Heated):
Driver Heated Seat Switch
Fuse 14 (JB)
G300
Junction Block
Memory Heated Seat/Mirror Module
Passenger Heated Seat Switch
8W-63-6 (Memory/Heated):
Driver Power Seat Front Riser Motor Sensor
Driver Power Seat Horizontal Motor Sensor
Driver Power Seat Rear Riser Motor Sensor
Driver Power Seat Recliner Motor Sensor
Memory Heated Seat/Mirror Module
8W-63-7 (Memory/Heated):
Driver Power Seat Front Riser Motor Sensor
Driver Power Seat Horizontal Motor Sensor
Driver Power Seat Rear Riser Motor Sensor
Driver Power Seat Recliner Motor Sensor
Memory Heated Seat/Mirror Module
8W-63-8 (Memory/Heated):
Body Control Module
Circuit Breaker No.2 (JB)
Driver Heated Seat Back
Driver Heated Seat Cushion
G300
Junction Block
Memory Heated Seat/Mirror Module
Passenger Heated Seat Back
Passenger Heated Seat Cushion
NOTE: To view sheets referred to in these diagrams, see Complete Body and Chassis Diagrams.
Electrical Diagrams
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.