Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Chrysler Intrepid (CANADA) V6-2.7LFACTORY OEM SERVICE PROCEDURE
Programming and Relearning
The MHSMM interfaces with the RKE via the Programmable Communication Interface (PCI) bus. The proper procedure of setting and recalling a memory position using the RKE is as follows:
1. Press memory switch 1 and release to recall memory position 1.
2. Adjust the seat, recliner and side view mirrors to the desired position.
3. Press momentarily and release memory switch S.
4. Press momentarily and release memory switch 1 or 2.
5. Press and release the UNLOCK button on one of the RKE transmitters. Do NOT press any switch for 10 seconds.
6. Set radio station presets.
To program the second driver's position, repeat the above procedure using memory switch 2. The second RKE transmitter can be programmed in the fashion.
To recall either of the programmed positions momentarily press and release either memory selector switch 1 or 2. If using RKE, just press and release the UNLOCK button on the proper transmitter for either position 1 or 2.
A recall is possible any time the vehicle transmission is in PARK. This condition is monitored by the Body Control Module (BCM).
NOTE: The module will abort a recall if the transmission is moved out of park or if any seat movement is activated whether manually or by memory recall.
1. Press memory switch 1 and release to recall memory position 1.
2. Adjust the seat, recliner and side view mirrors to the desired position.
3. Press momentarily and release memory switch S.
4. Press momentarily and release memory switch 1 or 2.
5. Press and release the UNLOCK button on one of the RKE transmitters. Do NOT press any switch for 10 seconds.
6. Set radio station presets.
To program the second driver's position, repeat the above procedure using memory switch 2. The second RKE transmitter can be programmed in the fashion.
To recall either of the programmed positions momentarily press and release either memory selector switch 1 or 2. If using RKE, just press and release the UNLOCK button on the proper transmitter for either position 1 or 2.
A recall is possible any time the vehicle transmission is in PARK. This condition is monitored by the Body Control Module (BCM).
NOTE: The module will abort a recall if the transmission is moved out of park or if any seat movement is activated whether manually or by memory recall.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.