CONNECTOR IDENTIFICATION DIRECTORY

Connector			Illustration
A/C Pressure Sensor			Fig 1
Battery Temperature Sensor			Fig 2
Body Control Module Connector C1			Fig 3
Body Control Module Connector C2			Fig 4
Body Control Module Connector C3			Fig 5.
Body Control Module Connector C4			Fig 6
Body Control Module Connector C5			Fig 7
Brake Switch			Fig 8
Camshaft Position Sensor
2.4L			Fig 9
Clockspring 4-Pin Connector			Fig 10
Crankshaft Position Sensor
2.4L			Fig 11
2.5L			Fig 12
Data Link Connector (DLC)			Fig 13
Distributor Connector
2.5L
2-Pin Connector			Fig 14
6-Pin Connector			Fig 15
Downstream (1/2) Oxygen Sensor			Fig 16
EGR Solenoid			Fig 17
Engine Coolant Temperature Sensor			Fig 18
EVAP Purge Solenoid			Fig 19
Fuel Pump Module			Fig 20
Idle Air Control Motor
2.4L			Fig 21
2.5L			Fig 22
Ignition Coil
2.4L			Fig 23
Injector
2.4L			Fig 24
2.5L			Fig 25
Intake Air Temperature Sensor			Fig 26
Knock Sensor
2.4L			Fig 27
MAP Sensor			Fig 28
Output Speed Sensor			Fig 29
Power Steering Pressure Switch			Fig 30
Powertrain Control Module (PCM)			Fig 31
Speed Control Servo			Fig 32
Throttle Position Sensor
2.4L			Fig 33
2.5L			Fig 34
Transmission Control Module			Fig 35
Transmission Range Sensor			Fig 36
Upstream (1/1) Oxygen Sensor			Fig 37

Fig 1: Identifying A/C Pressure Sensor Connector Terminals

Courtesy of CHRYSLER CORP.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Connector Identification