ENGINE CODE LOCATION

Application		Location
Avenger & Sebring Coupe
2.0L 4 Cyl.		Side Of Cylinder Block, Behind Starter. See Fig 1
2.5L V6		Front Side Of Cylinder Block, On The Top Edge Of The Block, Near Transaxle Housing. See Fig 2
Breeze, Cirrus & Stratus
2.0L 4 Cyl.		Left Rear Of Cylinder Block, Behind Starter. See Fig 3
2.4L 4 Cyl.		Rear Of Cylinder Block, Above Flywheel, Roughly Center & Top Of The Block. See Fig 4
2.5L V6		Rear Of Cylinder Block, Below Cylinder Head. See Fig 5
Sebring Convertible
2.5L V6		Rear Of Cylinder Block, Below Cylinder Head. See Fig 5
2.4L 4 Cyl.		Rear Of Cylinder Block, Above Flywheel, Roughly Center & Top Of The Block. See Fig 4
Concorde, Intrepid, LHS & 300M
2.7L V6, 3.2L V6 & 3.5L V6		Rear Of Cylinder Block, Below Driver's Side Cylinder Head Surface, Just Above Flywheel. For 2.7L, See Fig 6 . For 3.2L & 3.5L, See Fig 7
Neon
2.0L 4 Cyl. (SOHC & DOHC)		Left Rear Of Cylinder Block, Behind Starter. See Fig 3
Prowler
3.5L V6		Rear Of The Cylinder Block, Just Below Cylinder Head. See Fig 7
Viper
8.0L V10		Lower Right Front Of The Cylinder Block Near The Oil Filter. See Fig 8

Fig 1: Locating Engine Identification Code (2.0L 4 Cyl. - Avenger & Sebring Coupe)

Courtesy of CHRYSLER CORP.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Engine Code Location