LUBRICATION SPECIFICATIONS

Material

Condition

Specification

Engine Oil ⁽¹⁾

3.3L: Ambient Temperature Less Than -20°F (-29°C) Up To 100°F (30°C)

SAE 5W-30

Engine Oil ⁽¹⁾

3.3L: Ambient Temperature Above 0°F (-18°C) To Over 100°F (38°C)

SAE 10W-30

Engine Oil ⁽¹⁾

3.5L: Ambient Temperature Above 0°F (-18°C) To Over 100°F (38°C)

SAE 10W-30

Engine Oil ⁽¹⁾

3.5L: Ambient Temperature Less Than -20°F (-29°C) To 32°F (0°C)

SAE 5W-30

Engine Coolant

All

50/50 Mixture Of Distilled Water & Ethylene Glycol

Power Steering Fluid

All

Mopar Power Steering Fluid Or Equivalant

Brake Fluid

All

DOT 3

Transaxle Fluid ⁽²⁾

All

Mopar ATF+2: Type 7176

Differential Lubricant

All

Petroleum Based Hypoid Gear Lube 80W-90

A/C Refrigerant

All

R-134a

A/C Refrigerant Oil

All

Polyalkaline Glycol (PAG) Refrigerant Oil

⁽¹⁾	Use oil with viscosity that best reflects climate conditions. Use only API approved oil with Starburst Symbol.

⁽²⁾	The recommended transaxle fluid is Mopar ATF+2 Type 7176. Use DEXRON III only when recommended fluid is unavailable.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Lubrication Specifications

Use the Manual With the Right Hardware

When to See a Mechanic

Rather have a pro handle this?