1995 Chrysler Sebring LXiFACTORY OEM SERVICE PROCEDURE

Steering Column: Description

WARNING: Deactivate air bag system before performing any service operation involving steering column components. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM . DO NOT  apply electrical power to any component on steering column without first disconnecting air bag module. Air bag may deploy.

Steering column is a collapsible design which uses a 2-piece intermediate shaft between steering column and steering rack. Steering column assembly contains a combination switch, ignition switch and steering lock assembly. See Figure. Tilt column is standard.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.