Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1995 Chrysler LeBaronFACTORY OEM SERVICE PROCEDURE
Torque Specifications
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Adjusting Slot Nut | 40 (54) | |
| Alternator-To-Pump Support Strut Nut | 40 (54) | |
| Crossmember-To-Frame Bolt | 90 (122) | |
| Exhaust Pipe Bolt | 25 (34) | |
| Fitting-To-Pump | 55 (75) | |
| Gear-To-Crossmember Bolt | 50 (68) | |
| Power Steering Pump-To-Bracket | ||
| 8-mm Mounting Bolt | 21 (28) | |
| 10-mm Bolt & Nut | 30 (40) | |
| 10-mm Mounting Stud | 35 (48) | |
| Pressure & Return Lines-To-Fittings | 25 (34) | |
| Pressure Hose Banjo Bolt | 23 (31) | |
| Support Strut-To-Engine Nut | 111 (150) | |
| Tensioner-To-Mounting Bracket Nut | 40 (54) | |
| Tie Rod End Lock Nut | 55 (75) | |
| Tie Rod End-To-Knuckle Castle Nut | 38 (51) | |
| Wheel Lug Nuts | 95 (129) | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.