Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1995 Chrysler LeBaronFACTORY OEM SERVICE PROCEDURE
Compression Specifications - V6
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 1994 Plymouth Sundance, 1994 Plymouth Laser, 1994 Plymouth Acclaim, 1994 Eagle Vision, and 1994 Eagle Talon. However, it is still accessible from the selected car via links, so may be relevant.
COMPRESSION SPECIFICATIONS - V6
| Application | Specification | |||
|---|---|---|---|---|
| Compression Ratio | ||||
| 3.0L | 8.9:1 | |||
| 3.3L | 8.9:1 | |||
| 3.5L | 10.45:1 | |||
| Minimum Compression Pressure | ||||
| 3.0L | (1) 178 psi (12.5 kg/cm2 ) | |||
| 3.3L | (1) 100 psi (7.0 kg/cm2 ) | |||
| 3.5L | (1) 155-170 psi (10.9-12.0 kg/cm2 ) | |||
|
||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.