Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1995 Chrysler LeBaronFACTORY OEM SERVICE PROCEDURE
Test 102A - Identifying CCD Radio Problems
- Using scan tool, select AUDIO. If scan tool displays NO RESPONSE, go to TEST 103A . If scan tool does not display NO RESPONSE, go to next step.
- Using scan tool, read radio Diagnostic Trouble Codes (DTCs). If scan tool displays any DTCs, go to TEST 102B. If scan tool does not display any DTCs, go to next step.
- CCD radio diagnostics are separated into 2 categories: radio failures and system failures. For radio failures, go to next step. For system failures, verify customer complaint and identify problem area before performing appropriate test. See DIAGNOSING CCD RADIO SYSTEM table.DIAGNOSING CCD RADIO SYSTEM
Problem Perform Test No Sound From One Speaker TEST 104A No Sound From All Speakers TEST 105A Poor Sound Quality From One Speaker TEST 106A Noise Distortion From One Speaker TEST 106A - If any of the following radio failures exist, replace radio:
- AM/FM switch inoperative.
- Balance joystick inoperative.
- Eject switch inoperative.
- Equalizer inoperative.
- FF/FR switch inoperative.
- On/Off switch inoperative.
- Pause/Play switch inoperative.
- Scan switch inoperative.
- Seek switch inoperative.
- Set switch inoperative.
- Time switch inoperative.
- Tune switch inoperative.
- 1-5 presets inoperative.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.