1992 Chrysler ImperialFACTORY OEM SERVICE PROCEDURE

Automatic Temperature Control (ATC) Control Module/Control Panel: Notes

The ATC control module is part of the control panel. The ATC control module controls all electrical components of automatic temperature control. ATC control module provides signals to Power Module (PM), blend-air door actuator, fresh/recirculated air door actuator and mode door actuator according to control panel selections and sensor inputs.

Control panel allows operator to control various functions of ATC control module by pushing buttons to change system modes. See Fig 1. Blower speed, selected temperature, airflow direction and A/C mode is displayed on control panel. To change temperature display reading from Fahrenheit to Celsius or vice versa, depress floor and defrost buttons at the same time.

Fig 1: Identifying ATC Panel Functions/Symbols
G91C03250Courtesy of CHRYSLER MOTORS.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.