Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER1987CONQUEST 2.6 H, STANDARDREPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEMHIGH ALTITUDE COMPENSATION SYSTEMTESTINGHIGH ALTITUDE COMPENSATOR (HAC)CALIFORNIA
1987 Chrysler Conquest 2.6 H, Standard
High Altitude COMPENSATOR (HAC): California
1987 Chrysler Conquest 2.6 H, StandardSECTION California
- Disconnect White-striped vacuum hose from HAC. Connect vacuum pump to HAC. At low altitude, 3900 ft. (1200 m) or less, when vacuum is applied, vacuum should leak. At high altitude, vacuum should hold.
- On low altitude models, disconnect Black hose from HAC and connect vacuum pump. Vacuum should hold when applied. On high altitude models, disconnect Black hose from HAC and connect another vacuum pump (HAC now has 2 vacuum pumps connected to it). Hold vacuum with first pump, and apply vacuum with second pump. Vacuum should leak when applied.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.