1985 Chrysler Laser Base, AutomaticFACTORY OEM SERVICE PROCEDURE

Seats - Power: Testing: Notes

If power seat malfunctions, test for electrical or mechanical failure. With wiring connected and dome light on, operate switches. Watch ammeter or dome light for evidence of power consumption by seat motor. If dome light dims and ammeter moves, motor is jammed and a mechanical problem is indicated. If there is no evidence of power use, wiring and electrical problems are indicated.

Chapter Navigation
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.