Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER1984LEBARON BASE, 2D CONVERTIBLE, 2.2 CREPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEMEGR SYSTEMTESTINGEGR SYSTEM OPERATION CHECKALL EXCEPT 2.6L ENGINE
1984 Chrysler LeBaron Base, 2D Convertible, 2.2 C
All Except 2.6L Engine
1984 Chrysler LeBaron Base, 2D Convertible, 2.2 CSECTION All Except 2.6L Engine
- Place transmission in Neutral (man. trans.) or "P" (auto. trans.). Start engine and warm to normal operating temperature by idling engine.
- Abruptly open throttle to approximately 2000-3000 RPM. Visible movement of EGR valve stem should be noted. Repeat several times if necessary.
- Attach hand vacuum pump to EGR valve with engine at idle. Apply at least 5 in. Hg of vacuum and engine should run rough or stall.
- Attach vacuum gauge to EGR hose and open throttle quickly several times. Fluctuation of several in. Hg should be noted.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.