Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Removal Procedure
- Reposition the seat as necessary to access the bolts.
Front Floor Console Extension Panel Bolt (1) - Remove
- Release the retainers with a suitable plastic trim tool.
- Front Floor Console Extension Panel - Left Side (2) - Remove
Release the retainers with a suitable plastic trim tool.
- Front Floor Console Extension Panel - Right Side (1) - Remove
Press the integral retainer of keyless entry control module bracket (1).
Press the integral retainer of keyless entry control module bracket (1).
- Disconnect the electrical connectors.
Reposition the floor carpet to remove the keyless entry control module.
- Keyless Entry Control Module (1) - Remove
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.