Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2022 Chevrolet Trailblazer LFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | Total System | 3.40 OZS. | 0.1 L | PAG Oil | S | ||
| Air Cond Refrigerant | 1.32 LBS. | 0.59 KG | R-1234yf | S | |||
| Automatic Transmission Fluid | Trans Mfr CD VT40/MRG | Complete Trans System | 8.80 QTS. | 8.32 L | Automatic Transmission Fluid HP CVTF | S | |
| Automatic Transmission Fluid | Trans Mfr CD VT40/MRG | Overhaul | 9.10 QTS. | 8.61 L | Automatic Transmission Fluid HP CVTF | S | |
| Brake Fluid | Hydraulic System | 1.40 PTS. | 0.66 L | DOT 4 Motor Vehicle Brake Fluid | S | ||
| Differential Gear Oil | Rear Axle | 0.74 QTS. | 0.7 L | DEXRON LS SAE 75W-90 | S | ||
| Engine Coolant | 1.2L Eng | 6.70 QTS. | 6.34 L | 50/50 mixture of DEX-COOL and clean, drinkable water | S | ||
| Engine Oil | 1.2L Eng | w/Filter | 4.20 QTS. | 3.97 L | SAE 5W-30 | DEXOS1 gen 2 full synthetic engine oil. In an area of extreme cold, where the temperature falls below -29Deg.C (-20Deg.F), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. | S |
| Fuel Tank | 13.20 GALS. | 49.96 L | S | ||||
| Transfer Case Fluid | Power Transfer Unit | 0.24 QTS. | 0.22 L | Transfer Case Fluid | S | ||
| Windshield Washer Fluid | 1.14 GALS. | 4.31 L | Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.