2021 Chevrolet Traverse LFACTORY OEM SERVICE PROCEDURE

Fastener Specifications

WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
GM5764607Courtesy of GENERAL MOTORS COMPANY
Electronic Suspension Rear Vertical Accelerometer Replacement

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Electronic Suspension Rear Vertical Accelerometer Bolt - - 9 (7 lb ft) Electronic Suspension Rear Vertical Accelerometer Replacement (F55)Β 
GM5503538Courtesy of GENERAL MOTORS COMPANY
Electronic Suspension Wheel Front Vertical Accelerometer Replacement

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Electronic Suspension Front Vertical Accelerometer Bolt - - 9 (7 lb ft) Electronic Suspension Wheel Front Vertical Accelerometer Replacement (F55)Β 
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.