Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Chevrolet Traverse LFACTORY OEM SERVICE PROCEDURE
Fastener Specifications
WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Electric Belt Drive Rack and Pinion Steering Gear (AWD)
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Power Steering Assist Motor Bolt [3x] | Yes | - | Power Steering Assist Motor Bolt Sequence | Power Steering Assist Motor Replacement (AWD) Power Steering Assist Motor Replacement (RWD) |
| 2 | Steering Gear Bolt [2x] | Yes | - | First Pass: 100 (74 lb ft) Final Pass: 90 - 100 degrees |
Electric Belt Drive Rack and Pinion Steering Gear Replacement (AWD) Electric Belt Drive Rack and Pinion Steering Gear Replacement (RWD) |
| 3 | Steering Gear Nut [2x] | - | - | - | Electric Belt Drive Rack and Pinion Steering Gear Replacement (AWD) Electric Belt Drive Rack and Pinion Steering Gear Replacement (RWD) |
| 4 | Steering Linkage Inner Tie Rod | - | - | 105 (77 lb ft) | Steering Linkage Inner Tie Rod Replacement |
| 5 | Steering Gear Boot Inner Clamp | Yes | - | - | Steering Gear Boot Replacement |
| 6 | Steering Linkage Outer Tie Rod Nut | - | - | First Pass: 35 (26 lb ft) Final Pass: 40 - 50 degrees |
Steering Linkage Outer Tie Rod Replacement |
Electric Belt Drive Rack and Pinion Steering Gear (RWD)
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Power Steering Assist Motor Bolt [3x] | Yes | - | Power Steering Assist Motor Bolt Sequence | Power Steering Assist Motor Replacement (AWD) Power Steering Assist Motor Replacement (RWD) |
| 2 | Steering Gear Bolt [2x] | Yes | - | - | Electric Belt Drive Rack and Pinion Steering Gear Replacement (AWD) Electric Belt Drive Rack and Pinion Steering Gear Replacement (RWD) |
| 3 | Steering Gear Nut [2x] | - | - | First Pass: 58 (43 lb ft) Final Pass: 90 - 105 degrees |
Electric Belt Drive Rack and Pinion Steering Gear Replacement (AWD) Electric Belt Drive Rack and Pinion Steering Gear Replacement (RWD) |
| 4 | Steering Linkage Inner Tie Rod | - | - | 105 (77 lb ft) | Steering Linkage Inner Tie Rod Replacement |
| 5 | Steering Gear Boot Inner Clamp | Yes | - | - | Steering Gear Boot Replacement |
| 6 | Steering Linkage Outer Tie Rod Nut | - | - | First Pass: 35 (26 lb ft) Final Pass: 40 - 50 degrees |
Steering Linkage Outer Tie Rod Replacement |
Power Steering Assist Motor
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Small Steering Gear Housing Cover | Yes | - | - | Power Steering Assist Motor Replacement (AWD) Power Steering Assist Motor Replacement (RWD) |
| 2 | Large Steering Gear Housing Cover | Yes | - | - | Power Steering Assist Motor Replacement (AWD) Power Steering Assist Motor Replacement (RWD) |
| Power Steering Assist Motor Bolt Sequence | |||||
|---|---|---|---|---|---|
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
| Metric (English) | |||||
| 1 | Power Steering Assist Motor Bolt [3x] | Yes | - | First Pass: 3 (27 lb in) Second Pass: 6 (53 lb in) Third Pass: 10 (89 lb in) Final Pass: 55 - 60 degrees |
Power Steering Assist Motor Replacement (AWD) Power Steering Assist Motor Replacement (RWD) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.