2021 Chevrolet Suburban Z71FACTORY OEM SERVICE PROCEDURE

Fastener Specifications

GM5586958Courtesy of GENERAL MOTORS COMPANY
NOTE: Callouts in the following chart represent components shown in graphic above.
Low Frequency Console Antenna & Garage Door Opener Transmitter

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Theft Deterrent Module Bolt [2x] - - 1.5 N.m (13 lb in) Low Frequency Console Antenna Replacement (DCH)Β Low Frequency Console Antenna Replacement (D07)Β 
2 Garage Door Opener Transmitter Bolt [2x] - - 1.5 N.m (13 lb in) Garage Door Opener Transmitter ReplacementΒ 
GM5869985Courtesy of GENERAL MOTORS COMPANY
NOTE: Callouts in the following chart represent components shown in graphic above.
Low Frequency Instrument Panel Antenna

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Low Frequency Instrument Panel Antenna [2x] - - 2.5 N.m (22 lb in) Low Frequency Instrument Panel Antenna Replacement (9C1)Β 
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.