Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2020TAHOE LS, RWD, GAS/ETHANOLREPAIR AND DIAGNOSISSTEERINGSTEERING COLUMNSTEERING WHEEL AND COLUMNREPAIR INSTRUCTIONSSTEERING COLUMN CONTROL MODULE REPLACEMENT
2020 Chevrolet Tahoe LS, RWD, Gas/Ethanol
Steering Column Control Module Replacement
2020 Chevrolet Tahoe LS, RWD, Gas/EthanolSECTION Steering Column Control Module Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure Instrument Panel Knee Bolster Replacement (Chevrolet/GMC) , or Instrument Panel Knee Bolster Replacement (Cadillac) |
|
| 1 | Steering Column Control Module Bolt
CAUTION:
Refer to Fastener Caution . Tighten .9 - 1.4 N.m (8 - 12 lb in) |
| 2 | Steering Column Control Module Procedure
NOTE:
Several wiring harnesses are secured to the steering column control module. Note the routing of the harnesses before removing them from the retainers to aid in installation. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.