Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Chevrolet Camaro SS, 2D Coupe, Standard TransFACTORY OEM SERVICE PROCEDURE
Typical Scan Tool Data
Body Control Module-Scan Tool Parameters
| Circuit | Cruise Control Switch Status - Parameter | Cruise Control Switch 2 - Parameter | ||
|---|---|---|---|---|
| 12 V Reference = Normal Function | Inactive | Idle | ||
| 12 V Reference = Open Circuit | Open/Short to Ground | Idle | ||
| 12 V Reference = Short to Ground | Undetermined State | Undefined | ||
| 12 V Reference = Short to Voltage | Inactive | Idle | ||
| Circuit | Cruise Control Switch Status - Parameter | Cruise Control Switch 2 - Parameter | ||
|---|---|---|---|---|
| Cruise Control Set/Coast/Resume/Accelerate Switch Signal = Normal Function | Inactive/Cruise Control On/Set/Resume/Cancel | Idle | ||
| Cruise Control Set/Coast/Resume/Accelerate Switch Signal = Open Circuit | Open/Short to Ground | Idle | ||
| Cruise Control Set/Coast/Resume/Accelerate Switch Signal = Short to Ground | Open/Short to Ground | Idle | ||
| Cruise Control Set/Coast/Resume/Accelerate Switch Signal = Short to Voltage | Short to Battery | Idle | ||
| Circuit | Cruise Control Switch Status - Parameter | Cruise Control Switch 2 - Parameter | ||
|---|---|---|---|---|
| Adaptive Cruise Control Gap Up/Down Switch Signal = Normal Function | Inactive | Idle/Gap Down | ||
| Adaptive Cruise Control Gap Up/Down Switch Signal = Open Circuit | Open/Short to Ground | Inactive | ||
| Adaptive Cruise Control Gap Up/Down Switch Signal = Short to Ground | Undetermined State | Undefined | ||
| Adaptive Cruise Control Gap Up/Down Switch Signal = Short to Voltage | Inactive | Short to Battery | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.