2018 Chevrolet Corvette Z51, 2D Convertible, Automatic TransFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 4.10 OZS. 0.12 L PAG Oil S
Air Cond Refrigerant w/R-1234yf 1.16 LBS. 0.52 KG R-1234yf S
Air Cond Refrigerant w/R-134a 1.20 LBS. 0.54 KG R-134a S
Automatic Transmission Fluid Eng CD LT1 Complete System,Including Cooler Volumen 11.73 QTS. 11.1 L DEXRON HP Automatic Transmission Fluid S
Automatic Transmission Fluid Overhaul 11.30 QTS. 10.69 L DEXRON HP Automatic Transmission Fluid S
Automatic Transmission Fluid Pan Removal and Filter Replacement 7.40 QTS. 7 L DEXRON HP Automatic Transmission Fluid S
Brake Fluid 0.90 QTS. 0.85 L DOT 3 Hydraulic Brake Fluid All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. S
Differential Gear Oil Rear Axle,2.41 2.96 QTS. 2.8 L DEXRON LS Gear Oil GM Part No. 88862624. S
Differential Gear Oil Rear Axle,2.56 mLSD 2.53 QTS. 2.39 L DEXRON LS Gear Oil GM Part No. 88862624. S
Differential Gear Oil Rear Axle,2.73 eLSD 2.96 QTS. 2.8 L DEXRON LS Gear Oil GM Part No. 88862624. S
Differential Gear Oil Rear Axle,3.42 eLSD 2.96 QTS. 2.8 L DEXRON VI GM Part No. 88865601. S
Differential Gear Oil Rear Axle,3.42 mLSD,w/Cooler 2.96 QTS. 2.8 L DEXRON LS Gear Oil GM Part No. 88862624. S
Differential Gear Oil Rear Axle,3.42 mLSD 2.53 QTS. 2.39 L DEXRON LS Gear Oil GM Part No. 88862624. S
Differential Gear Oil Rear Axle,eLSD Clutch System 0.60 QTS. 0.56 L DEXRON VI GM Part No. 88865601. S
Engine Coolant w/o V08 11.80 QTS. 11.16 L 40/60 mixture of DEX-COOL and clean, drinkable water All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. S
Engine Coolant w/V08 12.70 QTS. 12.01 L 40/60 mixture of DEX-COOL and clean, drinkable water All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. S
Engine Oil Eng CD LT1 w/Filter,Dry Sump Oil Tank 9.80 QTS. 9.27 L API - SAE 5W-30 Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. S
Engine Oil Eng CD LT1 w/Filter 7.00 QTS. 6.62 L API - SAE 5W-30 Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. S
Engine Oil Eng CD LT1 w/o Filter,Dry Sump Oil Tank 9.50 QTS. 8.99 L API - SAE 5W-30 Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. S
Engine Oil Eng CD LT1 w/o Filter 6.50 QTS. 6.15 L API - SAE 5W-30 Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. S
Fuel Tank 18.50 GALS. 70.03 L S
Windshield Washer Fluid N/A N/A Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.