Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2017 Chevrolet Traverse LS BaseFACTORY OEM SERVICE PROCEDURE
Maintenance Items
| Maintenance Procedure | Link |
|---|---|
| Approximate Fluid Capacities | Approximate Fluid Capacities |
| Fluid and Lubricant Recommendations | Fluid and Lubricant Recommendations |
| Maintenance Replacement Parts | Maintenance Replacement Parts |
| GM Oil Life System Resetting | GM Oil Life System Resetting GM Oil Life System Resetting (With Scan Tool) |
| Tire Rotation | Tire Rotation |
| Tire Pressure Indicator Sensor Learn | Tire Pressure Indicator Sensor Learn |
| Passenger Compartment Air Filter Replacement | Passenger Compartment Air Filter Housing Replacement |
| Brake Pad Inspection | Brake Pad Inspection |
| Cooling System Draining and Filling | Cooling System Draining and Filling (Static Fill)Cooling System Draining and Filling (Vac N Fill) |
| Hydraulic Brake System Bleeding | Hydraulic Brake System Bleeding (Manual)Hydraulic Brake System Bleeding (Pressure) |
| Air Cleaner Element Replacement - 3.6L (LLT) | Air Cleaner Element Replacement - 3.6L (LLT) |
| Spark Plug Replacement - 3.6L (LLT) | Spark Plug Replacement - 3.6L (LLT) |
| Drive Belt Replacement - 3.6L (LLT) | Drive Belt Replacement - 3.6L (LLT) |
| Automatic Transmission Fluid Drain and Fill - 6T75 (M7V M7X) | Transmission Fluid Drain and Fill - 6T75 (M7V M7X) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.