2017 Chevrolet City Express LSFACTORY OEM SERVICE PROCEDURE

Removal Procedure

  1. Place the transmission in Park and apply the parking brake.
  2. Battery Negative Cable Disconnection and Connection
  3. Transmission Control Lever Knob Replacement
  4. Instrument Panel Lower Trim Panel Replacement
    GM3944175Courtesy of
  5. Press the pawls (1) of the park lock cable slider (2) while sliding it in the direction of the casing cap (3), and separate the adjusting holder (4) and slider.
  6. Remove the park lock cable (5) from the shift selector.
    GM3944191Courtesy of
  7. Lift the clip (1) in the direction of arrow (2) and remove the park lock cable in the direction of arrow (3) from the key cylinder (5).
    GM4204233Courtesy of
  8. Remove the park lock cable (3).
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.