Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Chevrolet SS Automatic TransFACTORY OEM SERVICE PROCEDURE
Fastener Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Battery Hold Down Retainer Fastener | 17 N.m | 13 lb ft |
| Battery Hold Down Strap Retainer | 22 N.m | 16 lb ft |
| Battery Negative Cable Post Fastener | 5 N.m | 44 lb in |
| Battery Negative Cable to Ground Fastener | 25 N.m | 18 lb ft |
| Battery Positive Cable Extension Cable to Junction Block Fastener | 15 N.m | 11 lb ft |
| Battery Positive Cable Post Fastener | 5 N.m | 44 lb in |
| Battery Positive Cable to Accessory Wiring Junction Block Fastener | 9 N.m | 80 lb in |
| Battery Positive Cable to Generator Fastener | 10 N.m | 89 lb in |
| Battery Positive Cable to Plenum Fastener | 15 N.m | 11 lb ft |
| Body Harness Terminal to Negative Battery Cable Fastener | 9 N.m | 80 lb in |
| Engine Ground Cable to Body Fastener | 22 N.m | 16 lb ft |
| Engine Ground Cable to Engine Block Fastener | 25 N.m | 18 lb ft |
| Engine Wiring and Battery Positive Cable Bracket to Engine Block Stud Fastener (LS3) | 9 N.m | 80 lb in |
| Engine Wiring and Battery Positive Cable Conduit Fastener (LS3) | 9 N.m | 80 lb in |
| Generator Brace Fastener (LS3) | 58 N.m | 43 lb ft |
| Generator Bracket Fastener | 58 N.m | 43 lb ft |
| Generator Mounting Fastener (LS3) | 58 N.m | 43 lb ft |
| Starter Heat Shield Fastener (LS3) | 5 N.m | 44 lb in |
| Starter Mounting Fastener (LS3) | 58 N.m | 43 lb ft |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
