Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2016EXPRESS 2500 LS, 6.0L ENG VIN GREPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEMDATA COMMUNICATION SYSTEMREPAIR INSTRUCTIONSBODY CONTROL MODULE REPLACEMENTREMOVAL PROCEDURE

2016 Chevrolet Express 2500 LS, 6.0L Eng VIN G

Removal Procedure

2016 Chevrolet Express 2500 LS, 6.0L Eng VIN GSECTION Removal Procedure

Fig 1: Right Side Knee Bolster Trim Panel

Courtesy of GENERAL MOTORS COMPANY

Remove the right side knee bolster trim panel. Refer to Passenger Knee Bolster Replacement .
Fig 2: Body Control Module & Electrical Connectors
Courtesy of GENERAL MOTORS COMPANY

Disconnect the electrical connectors (2) from the body control module (BCM) (1).

Fig 3: Identifying BCM Retaining Tabs & Bracket

Courtesy of GENERAL MOTORS COMPANY

Release the tabs (2) retaining the BCM (1) to the bracket.
Remove the BCM (1) from the vehicle.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.