Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Chevrolet Colorado BaseFACTORY OEM SERVICE PROCEDURE
Fastener Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Power Steering Assist Motor Pivot Bolt | 12 N.m | 106 lb in |
| Steering Gear Bolt- Lower | ||
|
150 N.m | 111 lb ft |
|
30-45 degrees | |
| Steering Gear Bolt- Upper | 100 N.m | 74 lb ft |
| Steering Gear Housing Cover Bolt | 12 N.m | 106 lb in |
| Steering Linkage Inner Tie Rod | 90 N.m | 66 lb ft |
| Steering Linkage Outer Tie Rod Nut | ||
|
35 N.m | 26 lb ft |
|
85-95 degrees | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.