2016 Chevrolet City Express LTFACTORY OEM SERVICE PROCEDURE

Body Control Module Replacement

GM3910711Courtesy of
Callout Component Name

Preliminary Procedure

  1. If a replacement module is installed, save current module specification. Control Module References
  2. Battery Negative Cable Disconnection and Connection - Disconnect
  3. Instrument Panel Storage Compartment Replacement - Remove
1 Body Control Module

Procedure

  1. Electrical Connector - Disconnect
  2. Press on the tabs to release the body control module.
  3. If a replacement module is installed, program the module. Control Module References
Chapter Navigation
Return to Chapter: Repair Instructions
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.