Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2015 Chevrolet SS Standard TransFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 4.70 OZS. | 0.13 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.06 LBS. | 0.48 KG | R-134a | S | |||
| Brake Fluid | 1.82 PTS. | 0.86 L | DOT 4 Hydraulic Brake Fluid | S | |||
| Differential Gear Oil | Rear | 1.30 QTS. | 1.23 L | Castrol SAF Carbon Modified SAE 75W-85 API GL-5 Differential Oil | S | ||
| Engine Coolant | 11.00 QTS. | 10.4 L | 50/50 mixture of DEX-COOL and clean, drinkable water | After refill, the level must be checked. Add enough engine coolant so that the fluid is within the proper operating range. | S | ||
| Engine Oil | w/Filter | 8.00 QTS. | 7.57 L | API - SAE 5W-30 | Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. | S | |
| Fuel Tank | 19.00 GALS. | 71.92 L | S | ||||
| Manual Transmission Fluid | Additional Fill,w/Auxiliary Oil Cooler | 0.51 QTS. | 0.48 L | Manual Transmission Fluid | S | ||
| Manual Transmission Fluid | Standard Fill | 3.65 QTS. | 3.45 L | Manual Transmission Fluid | S | ||
| Manual Transmission Fluid | Total Transmission Fill,w/Auxiliary Oil Cooler | 4.16 QTS. | 3.93 L | Manual Transmission Fluid | S | ||
| Windshield Washer Fluid | N/A | N/A | Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.