Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2015 Chevrolet Impala Limited LSFACTORY OEM SERVICE PROCEDURE
Fastener Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Door Armrest Bracket Screws | 10 N.m | 89 lb in |
| Door Check Link | 25 N.m | 18 lb ft |
| Door Hinge Bolts | 33 N.m | 24 lb ft |
| Door Lock Striker Screws | 25 N.m | 18 lb ft |
| Door Rear Energy Absorbers Pad Screw | 2 N.m | 18 lb in |
| Front Door Lock Actuator Screws | 2 N.m | 18 lb in |
| Intermediate Door Hinge Bolts | 33 N.m | 24 lb ft |
| Lock Screws- Front Door | 10 N.m | 89 lb in |
| Lock Screws- Rear Door | 10 N.m | 89 lb in |
| Outside Handle Bolts- Front Door | 10 N.m | 89 lb in |
| Outside Handle Bolts- Rear Door | 10 N.m | 89 lb in |
| Rear Door Lock Actuator Screws | 2 N.m | 18 lb in |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.